Setting up the housing, Reparing the, Amera – Fantasea Line FG16 Housing User Manual
Page 12: Reparing, Ousing

FG16 Housing Instruction Manual 20131101
12
Canon PowerShot G16 Highlights
12MP 1/1.7" Canon CMOS sensor
28-140mm equivalent F1.8-2.8 lens, 6-stop 'Intelligent IS'
High Speed AF with a continues shooting speed of up to 9.3 fps
Full HD video recording capabilities at 1080p/60p resolution
DIGIC 6 processor
ISO 80-12800
Fixed 3" 920k dot PureColor II G screen
Optical viewfinder
Multi aspect RAW format recording in various frame ratios
HDR scene mode
Built-in Wi-Fi
SETTING UP THE HOUSING
PREPARING THE CAMERA
1. Install a memory card and a fully charged battery inside the camera.
2. Remove the camera strap from the camera if one was installed.
3. It is recommended to program the camera to the most frequently used underwater photo mode,
lighting and other key settings prior to installing the camera in the housing.
PREPARING THE HOUSING
1. When using the housing for the first time-
Note
It is important that a first dive is always carried out with the housing
empty (no camera installed inside) in order to verify that the housing
watertight seal has not been affected during transport and after long
periods of storage.