Alamo 803350C - Manual (Page 83)

INTRODUCTION
VERSA PRO 03/09 Introduction Section 2-3
© 2009 Alamo Group Inc.
INTRODUCTION
The Versa Pro Flail Mower is designed for medium-duty cutting such as lawn maintenance plus small weed
and grass control. With a reasonable amount of preventive maintenance, your mower will provide years of
dependable service.
For Non-Agricultural use, OSHA, ASAE, SAE, and ANSI standards require the use of Chain
Guards, Deflectors, or Solid Skirts at all times. The Mower manufacturer strongly
recommends the use of Chain Guards, Deflectors, or Solid Skirts for Agricultural purposes
as well to reduce the risk of property damage, serious bodily injury, or even death from
objects thrown out by or from contact with the Cutting Blades.
Mower Orientation: Front and rear, and left and right are determined by the normal direction
of travel (the same as your automobile).
At least 20% of the tractor’s total weight must be on the front tires with the Mower lifted to
provide adequate traction for safe steering under good conditions. Slow down on hills,
rough terrain, and curves.
Front and rear, and left and right are determined by the normal direction of travel (the same as on your
automobile).