Alamo 803350C - Manual (Page 116)

OPERATION
VERSA PRO 03/09 Operation Section 4-16
© 2009 Alamo Group Inc.
OPERA
T
ION
• Inspect the condition of the drive belts.
• Ensure the slip clutch is properly adjusted
and the friction plates are not frozen
together. Reference the Maintenance
Section for proper slip clutch maintenance.
• Ensure the slip clutch shield and drive belt
shields are in place and in good repair.
• Ensure the tractor PTO master shield is in
place, lowered and in good condition.
OPS-F-0039
• Check the oil level in tank and replenish if
needed. NOTE: Do not fill the tank with oil
above the level of the sight gauge.
Overfilling the tank with oil after initial filling
may result in oil being discharged through
the air filter on the top of the hydraulic tank.
• Perform scheduled lubrication as specified
in the maintenance section. OPS-F-0040
• Inspect cutter knives and knife pins for
looseness and excessive wear. Make sure
the mower is securely blocked up before
crawling beneath. Replace damaged, worn,
and missing knives as complete sets to
maintain cuttershaft balance.
• Remove any grass or other debris which
may be wrapped around the cuttershafts.
• Inspect the condition of deck skid shoes
and hardware. OPS-F-0041