Lift cylinders, Disassembly of lift cylinder, Maintenance – Alamo 803350C User Manual
Page 159
MAINTENANCE
VERSA PRO 03/09
Maintenance Section 5-19
© 2009 Alamo Group Inc.
MAINTENANCE
LIFT CYLINDERS
DISASSEMBLY OF LIFT CYLINDER
For part numbers and illustration, refer to the Parts Listing section.
1.
Disconnect hoses at cylinder. Cap all hoses to prevent fluid contamination. Remove cylinder from unit.
2.
Remove reducer bushing and snap ring which retains the rod guide. Remove rod guide, rod, and piston.
Remove guide and piston from rod.
3.
Replace all "O" rings, back-up washers, and rod wiper. Inspect rod, guide, piston, and body for damage.
4.
Clean inside of cylinder with mineral spirits. DO NOT wipe dry; air dry instead. Lint, dirt, and, grit can cause
immediate or premature failure.
5.
Lubricate all parts with clean hydraulic oil and reassemble.
6.
Reinstall cylinder with stop located on the upper side, to prevent bending the rod.
- 02986941P (99 pages)
- Machete T 7740 (90 pages)
- Switchblade Sickle Bar 6 (112 pages)
- FALCON 15/10 (156 pages)
- AXTREME2 02988075P (174 pages)
- Brahma 02968822P (64 pages)
- JD-5205 (104 pages)
- RX72 (52 pages)
- MACHETE 02968915C (174 pages)
- none (150 pages)
- 00756179P (70 pages)
- Lawn Mower (70 pages)
- Maverick Boom Arm Mower (174 pages)
- 803213C (140 pages)
- A-Boom (226 pages)
- 02979718C (110 pages)
- 272 (136 pages)
- A84B (148 pages)
- RHINO 2409 (106 pages)
- SHD96 (140 pages)
- 7191852C (110 pages)
- SAMURAI 02986950P (104 pages)
- 800 (58 pages)
- FC-0002 (122 pages)
- A60 (138 pages)
- ST10 (74 pages)
- Exten-A-Kut II (142 pages)
- RHINO 7214 MSL (44 pages)
- RHINO 95C (56 pages)
- A72B (138 pages)
- Interstater 803213C (186 pages)
- 6212 (100 pages)
- 4211 MSL (104 pages)
- Eagle 14 (186 pages)
- RHINO FX21 (156 pages)
- TS-135A (72 pages)
- TS-100A (154 pages)
- 02968915P (170 pages)
- Axtreme 02983326P (116 pages)
- RX96 (172 pages)
- 00761808C (170 pages)
- Axtreme 02984405 (106 pages)
- Swingtrim (126 pages)
- Axtreme FC-P-0002 (114 pages)