Equus 3150 - ABS/SRS + OBD2 Diagnostic Tool - Manual (Page 52)

Using the Code Reader
VIEWING ENHANCED DTCS
50 OBD2
„ To view additional enhanced DTCs, repeat steps 1 through 4, above.
„ To exit the enhanced mode, use the UP and DOWN
buttons, as necessary, to select Exit from the GM/Isuzu
Enhanced menu, then press the ENTER/FF
button. The
Code Reader returns to the OBD2 DTC screen.
Honda/Acura Enhanced DTCs
When View Enhanced DTCs is selected
from the Enhanced Main Menu (and
Honda/Acura is selected, if prompted), the
Honda/Acura Enhanced menu displays.
Depending on the protocol used to commu-
nicate with your vehicle, the Honda/Acura
Enhanced menu provides options to view:
„ Permanent DTCs or Temporary DTCs
„ Confirmed DTCs or History DTCs
1.
Use the UP
and DOWN buttons,
as necessary, to highlight the desired
option, then press the ENTER/FF
button.
„ A “One moment please” message
displays while the Code Reader
retrieves the selected DTCs.
„ If the Code Reader fails to link to the
vehicle’s computer, a “Linking
Failed” message shows on the Code
Reader’s display.
- Verify the ignition is ON, then
press the ENTER/FF button
to continue.
2.
To read the display:
Refer to DISPLAY FUNCTIONS on page 12 for a description
of LCD display elements.
„ A visible icon indicates that the Code Reader is being
powered through the vehicle’s DLC connector.
„ A visible icon indicates that the Code Reader is linked to
(communicating with) the vehicle’s computer.
„ The upper right hand corner of the
display shows the number of the
code currently being displayed, the
total number of codes retrieved.
„ The Diagnostic Trouble Code (DTC)
and related code definition are
shown in the lower section of the
LCD display.