Equus 3150 - ABS/SRS + OBD2 Diagnostic Tool - Manual (Page 11)

About the Code Reader
ADJUSTMENTS / SETTINGS AND DTC LIBRARY
OBD2 9
Selecting the Display Language
1.
Use the UP
and DOWN buttons,
as necessary, to highlight Select
Language in the MENU, then press the
ENTER/FF
button.
„ The Select Language screen displays.
„ The currently selected display
Language is highlighted.
2.
Press the UP
or DOWN button,
as necessary, to highlight the desired
display language.
3.
When the desired display language is high-
lighted, press the ENTER/FF button to
save your changes and return to the MENU
(shown in the selected display language).
Setting the Unit of Measurement
1.
Use the UP
and DOWN buttons,
as necessary, to highlight Unit of
Measurement in the MENU, then press
the ENTER/FF
button.
2.
Press the UP
or DOWN button,
as necessary, to highlight the desired
Unit of Measurement.
3.
When the desired Unit of Measurement
value is selected, press the ENTER/FF
button to save your changes.
Exiting the MENU Mode
1.
Use the UP
and DOWN buttons, as necessary, to highlight
Menu Exit in the MENU, then press the ENTER/FF button.
„ The LCD display returns to the DTC screen (if data is currently
stored in the Code Reader’s memory) or the “To Link” screen (if
no data is stored).