Figure 2-1 battery installation – EOTech Mini Red Dot Sight (MRDS) User Manual

Page 16

Text mode
Original mode

2-2

2.3.2 Battery Installation

. With a small, slotted screwdriver, access the battery compartment

by loosening the two captive screws and lifting the hinged lid as shown in Figure 2-1. Install
one CR1632 lithium battery with positive side facing up. Proper battery orientation is marked
on the lid. Reseat the hinged lid and tighten the captive screws until snug.

Figure 2-1 Battery Installation

Captive Screws

Battery

Compartment