EOTech Mini Red Dot Sight (MRDS) - Manual (Page 15)

2-1
CHAPTER 2
OPERATING INSTRUCTIONS
SECTION I
PREPARATION FOR USE AND INSTALLATION
2.1 UNPACKING THE EQUIPMENT
Before unpacking the equipment, verify that all major components are present. If any of the
major components are missing, seek guidance from the equipment issuing authority.
2.2 INSPECTION OF THE EQUIPMENT
Before use, inspect all pieces of equipment for any damage such as cracks, loose parts, or
other visible defects. If any damage or defects are noted, seek guidance from the equipment
issuing authority.
2.3 BATTERY HANDLING
2.3.1 Battery Inspection
. Before installation, inspect the battery for any cracks, dents,
leakage, or bulging. Never install a defective battery in the MRDS.
CAUTION ..
The captive screws on the hinged lid of the battery compartment need only be
tightened until snug in order to ensure proper seating of the o-rings. Using
excessive force may result in permanent damage to the MRDS.