Cyron Lighting HTW1010 RGB - Manual (Page 6)

a
DO NOT connect audio input to speaker outputs.
Controller will be damaged.
Sound sensitivity can be adjusted by pressing the MUSIC
button more than once, up to 5 times. Every time the button is
pressed there will be a sequence of light flashes, from one
flash to 5 flashes. 5 flashes indicates the sound sensitivity is at
its maximum. Depending on the type of sound/music and the
audio output level, the sensitivity adjustment may not play a
big role in light interaction. Experiment with different types of
music and output levels to get the optimum Music Light
appearance.
For more audio control look for CYRON inline adjustable
attenuator and Y-splitter at www.CYRON.com.
White light. Instant cool-white light.
Other tones of white can be achieved using COLOR DIALS.
In general, lowering the green and blue will generate
“warmer” tones of white.
Memory buttons 1 thru 7 can be used to memorize colors. To
memorize a color press the
and then press the desired
memory button 1 thru 7. Lights will flash confirming the
process.
Dimming buttons allow you to dim any “memorized” or
“paused” light in 4 steps of 100%, 75%, 50% and 25%.
Dimming does not work for light shows.
Dimming works best for memory buttons 1-7 or the
instant white light.
Dimming levels lower than 25% can be achieved by
first memorizing a color at 25% level. Then recalling
the color and dimming it again will result in lower
levels. Repeating this process can result in dimming
levels near 1%.
Auto Turn ON/Off _____
HTW1010 can be set to automatically turn on every time the power has
been disconnected and then restored. This is referred to as Auto On