Boonton 4540 Peak Power Meter Quick Start - Manual (Page 34)

4540 Power Meter
Quick Start Guide
PN: 98406000A © Copyright 2008 Boonton Page 34
4540 SPECIFICATIONS
Sensor Inputs
RF Channels 1 or 2
RF Frequency Range 1 MHz to 110 GHz*
Peak Pwr range -55 to +20 dBm*
CW Pwr range -70 to +44 dBm*
Relative Offset Range ±200.00 dB
Single Shot Bandwidth 5 MHz (based on 10 samples/pulse)
Video BW 70 MHz*
Rise Time 7 ns*
* Sensor Dependent, Calibrator Dependent
Acquisition and Measurement System
Time resolution 0.2 ns
A/D Converter 14 bit
DSP 32 bit floating point
Trigger
Ext Trig range, impedance ±5V, 1 MOhm
Min trig pulse width 15 ns
Max trig rate 30 MHz
Calibrator Source
Internal Calibrator 50MHz, CW -60 to +20dBm
Pulse Mode Automated Measurements
Pulse width Pulse power
Pulse rise-time Overshoot (dB or %)
Pulse fall-time Waveform average power
Pulse period Top level power
Pulse repetition frequency Bottom level power
Pulse duty cycle
Pulse delay (2 channel instruments only)
Pulse off-time Peak power
Edge delay
Statistical Mode Automated Measurements
Peak power Power or Percent CCDF at cursor
Average power Percent
Minimum power Total time (indicated)
Peak to Average ratio Total number of samples (indicated)
Dynamic Range