AirSep MN175-1 - Manual (Page 2)

INSTRUCTIONS FOR AIR OUTLET
VISIONAIRE / VISIONAIRE V
MN175-1 Rev. -
Page 2 of 2
INSTRUCTIONS FOR USE
1. Locate the Air Outlet (Fig. 1)at the top of the unit and locate the fitting. The fitting is
normally attached to the rubber holder to avoid loss. (Fig. 1).
2. Insert the pointed end of the fitting into the nebulizer tubing as far as possible.
(Fig. 2).
3. Insert the fitting into the Air Outlet until it clicks, securing it in place (Fig. 3).
4. The Air Outlet is now open and air should be flowing through the nebulizer, enabling
treatment.
5. To shut off the Air Outlet, press the metal tab (Fig.1) to release the fitting (Fig. 4).
Figure 1
Figure 2
Figure 3 Figure 4
Metal Tab
|MN175-1_-g~
MN175-1 Rev -
Fitting
Air Outlet