Brewer Element Treatment 2210 User Manual

Page 4

Text mode
Original mode

Document 101293 RevA

MODEL 2210 STEP 2

Foot End

Screw B

STEP A: With table in the upright position install Shelf Support using 4 Screws B (1/4”-20 x 2”). Do not
tighten at this time.

STEP B: Locate Drawer Supports according to above drawing so that the holes through the tube are
facing up, and the holes nearest the ends of the tubes are at the Foot End of the table. Install using 4
Screws B (1/4”-20 x 2”). Do not tighten at this time.

Tab

toward Foot End

Shelf Support

Drawer Supports

with holes upward and

toward Foot End

Drawer Supports

with holes upward and