Brewer Element Treatment 2210 - Manual (Page 11)

Document 101293 RevA Printed in USA © 2010 11
Leveling the Table
A Leveling Screw Pad is located at each corner under the
table’s base. Adjust the four Leveling Screw Pads, by turning
them up or down, to achieve a solid, level installation.
INSTALLATION
Leveling Screw Pad
DRAWER REMOVAL
To remove Drawer from bottom slide support: Fully extend the Drawer, locate the Retaining Clips and
push both clips in a clockwise direction as you pull the Drawer forward and out.
Drawer
(Bottom View)
Retaining Clips