Model 2210 – Brewer Element Treatment 2210 User Manual

Page 2

Document 101293 RevA

1/4”-20 x 3” Screw A (Qty. 2)

1/4”-20 x 1 1/4” Screw C (Qty. 8)

1/4”-20 x 1” Screw F (Qty. 4)

J-Bolt R (Qty. 2)

Allen Wrench (Qty. 1)

Snap Rivet (Qty. 32)

3/8” Nut L (Qty. 2)

Washer M (Qty. 2)

CAUTION

To avoid damaging the table’s upholstery or

painted surfaces, DO NOT use a knife or any other

sharp object to open the packaging.

WARNING

Two or more people should assist in moving the table.

Use proper lifting techniques when lifting. Failure to

do so could result in serious injury!

1/4”-20 x 2” Screw B (Qty. 8)

8-32 x 1 1/4” Screw E (Qty. 8)

8-32 Nut K (Qty. 8)

1/4”-20 x 1/2” Screw G (Qty 1)

1/4”-20 Nut H (Qty 1)

MODEL 2210

9/16” Open End Wrench

11/32” Socket or Wrench

Phillips Screw Driver

For the above model you will receive
three separate cartons: a frame & shelf
carton, an upholstery carton, and a
drawer carton. Inspect all three carefully
for shipping incurred damage.

COMPONENT IDENTIFICATION

Perform the following sequence in order when setting up

the table:

Unpacking

Assembly

Leveling the Table

Installing the Paper Roll

NOTE: Inspect all boxes and contents for damage.

Report any damage to the carrier immediately.

OVERVIEW

COMPONENT IDENTIFICATION

MODEL 2210 HARDWARE

NOTE: Save all packaging in case re-shipment is re-

quired.

MODEL 2210 TOOLS NEEDED