Asus MEW-RM - Manual (Page 63)

ASUS MEW-RM User’s Manual 63
4. BIOS SETUP
4. BIOS SETUP
PCI Configuration
USB Function [Enabled]
This motherboard supports Universal Serial Bus (USB) devices. Set to [En-
abled] if you want to use USB devices. Configuration options: [Disabled]
[Enabled]
ONB VGA BIOS First [No]
This field, when set to [Yes], gives priority to the onboard VGA BIOS over
other VGA controllers. Configuration options: [No] [Yes]
IRQ XX Used By ISA
These fields indicate whether or not the displayed IRQ for each field is
being used by a legacy (non-PnP) ISA card. [N0/ICU] indicates either that
the displayed IRQ is not used or that ISA Configuration Utility (ICU) is
being used to determine if an ISA card is using that IRQ. If you install a
legacy ISA card that requires a unique IRQ and you are not using an ICU,
you must set the field for that IRQ to [Yes]. For example: If you install a
legacy ISA card that requires IRQ 10, then set IRQ10 Used By ISA to
[Yes]. Configuration options: [No/ICU] [Yes]
PCI/PNP ISA IRQ Resource Exclusion