Hardware setup, Asus mew-rm user’s manual 19 – Asus MEW-RM User Manual
Page 19
ASUS MEW-RM User’s Manual
19
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
3) Onboard Audio Setting (AUDIOEN)
available on audio model only
The onboard 32-bit PCI audio may be enabled or disabled using this jumper. Dis-
able the onboard audio if you are using a PCI audio card on any of the expansion
slots or a primary AMR on the AMR slot (see 3.7.3 Audio Modem Riser (AMR)
Slot). If using a PCI audio expansion card, Onboard AC’97 Audio Controller in
4.4.2 I/O Device Configuration must also be disabled.
Setting
AUDIOEN
Enable
[1-2]
(default)
Disable
[2-3]
®
MEW-RM
MEW-RM Onboard Audio Setting
Enable
Disable
(Default)
1 2 3
1 2 3
AUDIOEN
4) Onboard Audio Codec Setting (CODEC)
available on audio model only
The onboard audio CODEC may be enabled or disabled using all of these jump-
ers. Disable the onboard audio CODEC if you are using a PCI audio card on any
of the expansion slots or a primary AMR on the AMR slot (see AMR Slot later in
this section). If using a PCI audio expansion card, Onboard AC’97 Audio Con-
troller in 4.4.2 I/O Device Configuration must also be disabled.
Setting
CODEC
Enable
[1-2] [1-2] [1-2] [1-2]
Disable
[2-3] [2-3] [2-3] [2-3]
®
MEW-RM
MEW-RM Audio Codec Setting
Disable
Enable
1
2
3
1
2
3
SPK
ADN#
AUD_EN1
AUD_EN2
SPK
ADN#
AUD_EN1
AUD_EN2