Asus TUA266 - Manual (Page 69)

ASUS TUA266 User’s Manual 69
4. BIOS SETUP
4. BIOS SETUP
Power Menu
AC PWR Loss Restart [Disabled]
This allows you to set whether you want your system to reboot after the
power has been interrupted. [Disabled] leaves your system off and [Enabled]
reboots your system. [Previous State] sets your system back to the state it is
before the power interruption. Configuration options: [Disabled] [Enabled]
[Previous State]
Wake/PWR Up On Ext. Modem [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the
computer when the external modem receives a call while the computer is in
Soft-off mode. NOTE: The computer cannot receive or transmit data until
the computer and applications are fully running. Thus connection cannot be
made on the first try. Turning an external modem off and then back on while
the computer is off causes an initialization string that will also cause the
system to power on. Configuration options: [Disabled] [Enabled]
Power Up On PCI Card [Disabled]
This feature allows your computer to be booted from another computer via
a network or PCI modem by sending a wake-up frame or signal.
Configuration options: [Disabled] [Enabled]
4.5.1 Power Up Control
IMPORTANT: This feature requires a network interface with Wake-On-LAN and
an ATX power supply with at least 720mA +5V standby power.