Asus TUA266 - Manual (Page 65)

ASUS TUA266 User’s Manual 65
4. BIOS SETUP
4. BIOS SETUP PCI Configuration
Slot 1, Slot 2, Slot 3, Slot 4, Slot 5 IRQ [Auto]
These fields automatically assign the IRQ for each PCI slot. The default
setting for each field is [Auto], which utilizes auto-routing to determine
IRQ assignments. Configuration options: [Auto] [NA] [3] [4] [5] [7] [9]
[10] [11] [12] [14] [15]
PCI/VGA Palette Snoop [Disabled]
Some non-standard VGA cards, such as graphics accelerators or MPEG
video cards, may not show colors properly. Setting this field to [Enabled]
corrects this problem. If you are using standard VGA cards, leave this
field to the default setting [Disabled]. Configuration options: [Disabled]
[Enabled]
PCI Latency Timer [32]
Leave this field to the default setting [32] for best performance and stability.
SYMBIOS SCSI BIOS [Auto]
[Auto] allows the BIOS to detect whether you have a SYMBIOS SCSI card.
If such card is detected, the SCSI BIOS is enabled. Otherwise, the onboard
SCSI BIOS is disabled.
The setting [Disabled] disables the onboard SYMBIOS SCSI BIOS so that
the BIOS on an add-on SYMBIOS SCSI card can be used. If the SYMBIOS
SCSI card does not have a BIOS, the Symbios SCSI card will not work.
Configuration options: [Auto] [Disabled]
4.4.3 PCI Configuration