Asus A7N266-C - Manual (Page 21)

ASUS A7N266-C User’s Manual 21
3. HARDWARE SETUP
6) USB Device Wake-up (USB01PWR / USB23PWR / USB45PWR)
Set these jumpers to +5V to allow wake up from the S1 sleep state (CPU stopped;
RAM refreshed; system running in low power mode). The default setting for
the three jumpers is [1-2] to select +5V, since not all computers have the
appropriate power supply.
NOTE: This feature requires an ATX power supply that can supply at least 2A
on the +5VSB lead when these jumpers are set to +5VSB. Otherwise, the system
does not power up. The total current consumed must NOT exceed the power
supply capability (+5VSB) for normal working conditions or in sleep mode.
A7N266-C
0 1 0 1 0 1
®
A7N266-C USB Device Wake Up
USBPWR45
USBPWR23
USBPWR01
+5VSB
2 3
+5V
(Default)
1 2
+5V
1 2
(Default)
+5VSB
2 3