Asus P5KPL-AM/PS - Manual (Page 54)

2-14 ASUS P5KPL-AM
Execute Disable Bit [Enabled]
Allows you to Enable/disable Execute Disable Function.
Configuration options: [Disabled] [Enabled]
Intel ® SpeedStep Technology [Enabled]
Allows you to use the Enhanced Intel ® SpeedStep ® Technology. When set to [Enabled], you
can adjust the system power settings in the operating system to use the EIST feature. Set this
item to [Disabled] if you do not want to use the EIST.
Configuration options: [Enabled] [Disabled]
The following item appears only when you installed an Intel ® Pentium ® 4 or later CPU that
supports the Enhanced Intel SpeedStep ® Technology (EIST).
2.4.4 Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an item then
press to display the sub-menu.
North Bridge Configuration
Memory Remap Feature [Enabled]
Allows you to enable or disable the remapping of overlapped PCI memory above the total
physical memory. Configuration options: [Enabled] [Disabled]
Configure DRAM Timing by SPD [Enabled]
Allows you to enable or disable configurating DRAM Timing by SPD.
Configuration options: [Enabled] [Disabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to select the graphics controller as the primary boot device.
Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI]
Internal Graphics Mode Select [Enabled, 8MB]
Allows you to select the amout of system memory used by the Interanal graphics device.
Configuration options: [Disabled] [Enabled, 1MB] [Enabled, 8MB]
PEG Port Configuration
PEG Force x1 [Disabled]
Allows you to enable or disable the PEG Forec x 1.
Configuration options: [Enabled] [Disabled]
Video Function Configuration
DVMT Mode Select [DVMT Mode]
Allows you to select the DVMT Mode.
Configuration options: [Fixed Mode] [DVMT Mode]
DVMT/FIXED Memory [256MB]
Allows you to select the amount of the DVMT/FIXED Memory.
Configuration options: [128MB] [256MB]