Asus USB-N10 - Manual (Page 36)

ASUS USB-N10 Chapter 4: Using the ASUS WLAN Control Center 36
To set up the wireless connection properties, right-click the wireless icon on the
taskbar and select Open Network Connection. Then right-click the network
connection icon and select Property to open the Wireless Network Connection
Status page.
1. The General page shows the
status, duration, speed, and signal
strength. The green bars represent
signal strength, with five bars
indicating excellent signal and one
bar indicates poor signal.
2. Select the Wireless Networks tab
to show Preferred networks. Use
the Add button to add the “SSID”
of available networks and set the
connection preference order with
the Move up and Move down
buttons. The radio tower with a
signal icon identifies the currently
connected access point. Click
Properties to set the authentication
of the wireless connection.