Asus USB-N10 - Manual (Page 21)

ASUS USB-N10 Chapter 3: Connecting to the wireless network 21
3. Click Survey to scan for Ad Hoc
nodes. Select the node you want
to communicate with and press
Connect.
4. If the encryption settings of your
Network adapter are different from
those of the other Ad Hoc nodes, you
are prompted to make the encryption
of the two nodes identical. Click Apply
to activate the settings.
6. Click the Connection tab to view
the signal strength. Click OK to exit
the utility.
5. Click Status to view the association
state. If connection is established,
the Association State field shows
the connection status as either
Excellent Link and Connection or
Good Link and Connection.