Garmin GPSMAP 60Cx - Manual (Page 64)

Route Page
Use the Routes Page to create a route to a destination..
For more information, see Routes on page 31 .
Highway Page
When navigating a route, the Highway Page guides
you to the destination using data fields and a graphic
highway. Up to four user-selectable data fields show
information such as speed, distance, and time to next
point on the route. The list of data shown and the
method of selection is the same as for the Map and
Compass Pages and is explained in detail on page 40 .
The Highway graphic provides visual guidance,
taking you point by point to your final destination.
Your course is represented by a center line down the
middle of the graphic. As you move toward each
point on your route, the graphic shows the direction
you should move to stay on course to the next point.
Five scale settings allow you to zoom in or out on the
highway when you use move the ROCKER up or
down.
To navigate using the Highway Page:
1. While navigating, press the PAGE key to cycle
to the Main Menu.
2 Highlight the Highway icon, and press ENTER
and observe your path of travel displayed on
the highway graphic.
3. Press MENU to display the Options Menu. You
can do the following:
Stop navigation, recalculate, configure data
fields from four to three with a destination
guidance message, change the data fields or
restore defaults to factory settings.
Highway Page
GPSMAP 60Cx Owner’s Manual
M
AIn
M
enu
> h
IghwAy
P
Age