Garmin GPSMAP 60Cx - Manual (Page 49)

Map Page
The GPSMAP 60Cx comes with a built-in basemap
that includes a database of cities, interstates, state
and county highways, exit information, and lake and
river outlines. The standard basemap can be enhanced
using MapSource or BlueChart data.
Two map operating modes, position mode and pan
mode, determine what cartography is shown on the
map display.
Position mode pans the map to keep your present
location in the display area. The position marker
shows your travel on the Map Page. When you press
the ROCKER, the GPSMAP 60Cx enters pan mode,
which moves the map to keep the white arrow (map
pointer) within the display area. When you are in
panning mode, you can move the map pointer about
the page to highlight and identify map items. If there
is more than one map item under the pointer, a list
appears with the items highlighted on the map
You can add and configure up to four optional data
fields to the top of the page to provide a variety of
travel and navigational information.
To show data fields on the Map Page:
1. Press MENU to open the Map Page Options
Menu.
2. Highlight Data Field, and press ENTER. The
Show sub-menu appears.
3. Select the number of data fields you want to
show on the Map Page, and press ENTER.
Data fields
Show sub-menu
Map Page data fields
GPSMAP 60Cx Owner’s Manual
M
AIn
P
Ages
> M
AP
P
Age