Asus P5G41-M LX2/GB - Manual (Page 34)

2-8 Chapter 2: BIOS information
2.4.2 Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an item then
press to display the sub-menu.
North Bridge Configuration
Memory Remap Feature [Enabled]
Allows you to enable or disable the remapping of overlapped PCI memory above the total
physical memory. Configuration options: [Enabled] [Disabled]
Configure DRAM Timing by SPD [Enabled]
Allows you to enable or disable configurating DRAM Timing by SPD.
Configuration options: [Enabled] [Disabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to select the graphics controller as the primary boot device.
Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI]
IGD Graphics Mode Select [Enabled, 32MB]
Allows you to select the amout of system memory used by the Internal graphics device.
Configuration options: [Disabled] [Enabled, 32MB] [Enabled, 64MB] [Enabled, 128MB]
GTT Graphics Memory Size [No VT mode, 2MB]
This item is not user- configurable.
DVMT Memory [256MB]
Allows you to select the DVMT memory.
Configuration options: [128MB] [256MB] [Maximum DVMT]
Protect Audio Video Path Mode [Lite]
This item is not user- configurable.
South Bridge Configuration
Audio Controller [Enabled]
Allows you to set the audio controller. Configuration options: [Enabled] [Disabled]
Front Panel Type [HD Audio]
Allows you to select the front panel support type. If High Definition Audio Front Panel
used, set this item to [HD Audio] mode. Configuration options: [AC97] [HD Audio]
Onboard Gigabit LAN [Enabled]
Allows you to enable or disable the onboard Gigabit LAN controller.
Configuration options: [Enabled] [Disabled]
Onboard LAN Boot ROM [Disabled]
Allows you to enable or disable the boot ROM in the onboard LAN controller. This item
appears only when the Onboard LAN item is set to Enabled.
Configuration options: [Disabled] [Enabled]
The [Maximum DVMT] option only appears when installing 1GB DDR2 DIMMs into the
DIMM sockets.