Approach Tech NVR-2018 User Manual

Page 83

12.4 Change Timer Record Setting

Please follow the steps below to change the Timer Record setting through the network as and when

necessary.

1. Click the

button on the home page to enter the setup mode.

2. Click the

connection on the setting page to enter the Timer Record setting

page.

3. Set the

SCHEDULE

RECORD

to enable the

SCHEDULE

RECORD

function.

4. There are two time-periods available for scheduling each day. The Timer Record setting page

allows users to program the time each day that the NVR-2018 will start and stop recording. The

time is displayed in a 24-hour clock format. If there is a time overlap showing between two

continual time-period settings, the device will automatically combine the two time-period

settings into one combined time-period setting.

5. Click the

button to submit the new Timer Record setting.

6. Click the

button to return to the home page while the new image setting acts on

the images to effect the desired changes instantly. (If the setting has not been changed by

the above steps, any (re)entry onto the home page will find images in their earlier or original

setting. )