Asus Rampage III Gene User Manual

Page 61

Text mode
Original mode

6. Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that
supports either HD Audio or legacy AC`97 audio standard. Connect one end
of the front panel audio I/O module cable to this connector.

•

We recommend that you connect a high-definition front panel audio
module to this connector to avail of the motherboard’s high-definition audio
capability.

•

If you want to connect a high-definition front panel audio module to this
connector, set the

Front Panel Type item in the BIOS setup to [HD Audio];

if you want to connect an AC'97 front panel audio module to this connector,
set the item to [AC97]. By default, this connector is set to [HD Audio].

ROG Rampage III GENE

2-37