Asus Rampage III Gene - Manual (Page 122)

3-48 Chapter 3: BIOS setup
3.8.4 BIOS FlashBack
v02.61 (C)Copyright 1985-2010, American Megatrends, Inc.
Rampage III GENE BIOS SETUP Version 0213
Tools
BIOS2
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Drive Xpert Configuration
Drive Xpert Group:
Current Mode :Normal Mode
Driver Xpert Mode Update:
Update To Super Speed [Press Enter]
Update To EZ Backup [Press Enter]
Update To Normal Mode [Press Enter]
Drive Xpert Device(s) List:
Port 0 : [Not Detected]
Port 1 : [Not Detected]
Update To Super Speed �Press Enter�
This item allows you to use Super Speed function. Plug two identical SATA hard
drives in the SATA_E1 (orange, port 0) and SATA_E2 (white, port 1) connectors on
the motherboard and press the key.
Update To EZ Backup �Press Enter�
This item allows you to use EZ Backup function. Plug two identical SATA hard
drives in the SATA_E1 (orange, port 0) and SATA_E2 (white, port 1) connectors on
the motherboard and press the key.
Update To Normal Mode �Press Enter�
This item allows you to use the SATA_E1 (orange, port 0) and SATA_E2 (white,
port 1) connectors as normal SATA connectors.
Port 0/1 �XXXXX�
While entering BIOS setup, BIOS automatically detects the connected IDE/SATA
devices. These items display the status of the detected IDE/SATA devices.