Agilent Technologies E1364A User Manual

Page 49

Text mode
Original mode

iprintf (id, "CLOS (@%u)\n", channel);

ipromptf (dm, "TRIG SGL\n", "%t", reading);
printf ("\n Channel %u (closed): %s", i, reading);

iprintf (id, "OPEN (@%u)\n", channel);
ipromptf (dm, "TRIG SGL\n", "%t", reading);
printf ("\n Channel %u (open): %s", i, reading);
}

printf ("\n\nConnect DMM to NC and C lines of E1364A (4-wire
connection)");
getchar ();
iprintf (id, "CLOS (@100:115)\n");
printf ("\n\nContact Resistance -- Normally closed contacts\n");

for (i = 0; i <=15; i++)
{
channel = 100 + i;

iprintf (id, "OPEN (@%u)\n", channel);
ipromptf (dm, "TRIG SGL\n", "%t", reading);
printf ("\n Channel %u (closed): %s", i, reading);

iprintf (id, "CLOS (@%u)\n", channel);
ipromptf (dm, "TRIG SGL\n", "%t", reading);
printf ("\n Channel %u (open): %s", i, reading);
}

iclose (id);iclose (dm);

/* Close instrument session */

}

Appendix A

Example C Programs 49