Asus CUC2000-M - Manual (Page 21)

ASUS CUC2000-M User’s Manual 21
3. HARDWARE SETUP
Motherboard Settings
3. H/W SETUP
6) Onboard Audio CODEC Setting (AUD_EN1 / AUD_EN2)
(available on audio model only)
The onboard audio CODEC may be enabled or disabled using all of these jump-
ers. Disable the onboard audio CODEC if you are using an ISA or PCI audio
card on any of the expansion slots or a primary AMR on the AMR slot (see AMR
Slot later in this section). If using an ISA or PCI audio expansion card, On-
board AC97 Audio Controller in 4.4.2 I/O Device Configuration must also be
disabled.
CUC2000-M
CUC2000-M Audio Codec Setting
Disable Enable
(Default)
1
SPK
ADN#
AUD_EN1
AUD_EN2
SPK
ADN#
AUD_EN1
AUD_EN2 1
7) Onboard Audio Setting (AUDIOEN)
(available on PCI audio model only)
The optional onboard 32-bit PCI audio may be enabled by setting this jumper to
Enable. Disable the onboard audio if you are using an ISA or PCI audio card on
any of the expansion slots or a primary AMR audio card on the AMR slot (see
3.7.4 Audio Modem Riser (AMR) Slot).
Setting
AUDIOEN
Disable [1-2] (default)
Enable [2-3]
CUC2000-M
CUC2000-M Onboard Audio Setting
2 2 3
AUDIOEN
Disable Enable
(Default)
1