GE 45146 GE Choice Alert Wireless Keypad User Manual

Page 8

Step 2. Enter a number (1, 2, or 3) for the User code

you would like to change (1=Master code, 2= User 2

code, 3 = User 3 code).
Step 3. Press and release the Green button.
Step 4. Enter the new 4-digit code. Press and release

the Green button.
Step 5. Re-enter new 4-digit code again. Press and

release the Green button.
The LED will flash 5 times and turn off indicating the

code for that User code has been stored/changed.
Example: To set User 2 code to 2222
Press and release the Green button

(The LED will turn on)
Enter 1,2,3,4 (Wireless keypad is now in Program Mode)
Press and release the green button
Enter 2
Press and release the green button
Enter 2,2,2,2
Press and release the green button
Re-enter 2,2,2,2
Press and release the green button (red LED will flash 5

times and turn off)
In this example, User 2 code has been set as 2222.

Erasing Alternate User Codes
Alternate user codes can be removed completely from

the memory if necessary. Note: the Master Code (1)

cannot be erased, only changed.