AT&T Trimline 265 - Manual (Page 30)

27
CALLER ID OPERATION
Removing Call Records From Call Log
Removing a Specific Call Record
1. Press S or T to display the call
record to be removed.
2. Press and release REMOVE to
remove the displayed number from
call log.
Removing All Entries from Call
Record
1. From the caller ID review screen,
press REMOVE for at least two
seconds until the screen displays
2. Press REMOVE again to remove all
calls. The screen returns to the idle
screen.
NOTES:
• Numbers stored in memory will be lost if the telephone line cord is unplugged from
the telephone jack at the bottom of the telephone base or the modular telephone
wall jack, or if there is no battery power for more than 10 minutes.
• Press CLEAR on the back of the handset when finished storing a number in
memory to exit programming.
• When a caller ID entry is removed from the call log, it cannot be retrieved.