Set tone/pulse, Feature settings – AT&T Trimline 265 User Manual

Page 26

FEATURE SETTINGS

Set Tone/Pulse

When your telephone left the factory, the dial mode was set to tone. If you do not have

touch tone dialing service, you can change this setting to PULSE by following these steps:

1. After setting the call waiting feature, press OPTIONS once (or from the idle

screen, press OPTIONS ten times), the screen will show:

2. Press

the

and S keys to toggle between TONE and PULSE.

3. When the desired dial mode is displayed on the screen, press OPTIONS to save

your selection and exit the options menu.

NOTE: If you have pulse dial (rotary) service, you can switch to touch tone dialing

during a call by pressing *. This can be useful if you need to send tone signals to access
answering systems or long distance services.

After hanging up or pressing FLASH, the telephone automatically returns to its original

dial mode.