AT&T Trimline 265 - Manual (Page 22)

19
FEATURE SETTINGS
Set Home Area Code (HAC)
Home area code is the area code associated with your telephone number. It is necessary
to program a home area code so the telephone can properly display incoming calls and
dial the telephone numbers from the call log.
1. After setting the contrast (or press OPTIONS twice in idle screen), the screen
will display:
2. Press
S or T until the screen displays the first digit of your home area code. Do
not use the keypad to enter digits.
3. Press DISPLAY DIAL to save the digit and advance to the next digit.
4. Repeat steps 2 and 3 for the second and third digits of your home area code.
5. Press
OPTIONS to save the home area code and continue to set the local area
code.
If you dial… For… Then, in steps 2-4
7 digits
(phone number only, no
area code)
Enter your own area code.
10 digits
(area code + phone
number)
OR
11 digits
1 + area code + phone
number)
Calls within your own area
code
Enter 0 0 0, then follow the
directions in Set Local
Area Codes on page 20.
NOTE: There is no visual or audible confirmation when setting a new home area code.