GE 45613 GE Z-Wave 3-Way Dimmer Kit with Terminals User Manual
Page 15
normal operation. The air gap switch must be all the way in for
the switch to function and control the lighting.
Key Features
• Remote On/Off/Brightness control via the
Z-Wave controller/network
• Manual On/Off/Brightness control with the front panel rocker
• Compatible with 2, 3, or 4 way wiring configurations
• LED indicates switch location in a dark room
BASIC OPERATION
Remote Control
GE Z-Wave remotes provide control of an Individual device,
Groups of devices and Scenes. Other brands of Z-Wave
Certified remotes may not offer as much flexibility in how you
can set up your lighting control network. Please refer to your
remote control’s instructions for details on its capabilities and
instructions for adding and controlling devices.
Manual Control
The 45612 dimmer switch allows the user to:
Turn ON/OFF and control the brightness level of the connected
lighting.
• To turn the connected lighting ON: Tap the top of the rocker.
• To turn the connected lighting OFF: Tap the bottom of the rocker.
• To brighten the connected lighting: Press and hold the top of the
rocker; release when desired level is achieved.
• To dim the connected lighting; Press and hold the bottom of
the rocker release when desired level is achieved. Please note: