GE ZKD910SFSS - Manual (Page 4)

4
PRODUCT DIMENSIONS AND CLEARANCES
Design Information
9”
10-1/2”
A
B
C 1”
Including
Handle
Drawer
Open
23-1/4 ”
Dimensions
A B C
ZTD910 22” 26” 30”
ZTD910 w/ZXD30P 23-1/4” 27-1/2” 30”
ZKD910 22”26” 26-3/4”
ADVANCE PLANNING
• The drawer may be installed below a countertop, a
cooktop, a single or double oven and side by side using 2
drawers.
• The warming drawer can be installed below approved
cooktops. Allow 2” min. clearance from bottom of cooktop
burner box to top of warming drawer cutout. See page 8.
• The warming drawer can be installed below approved
ovens. Allow a 2” min. clearance between cutouts.
Additional clearances may be required. See page 7.
• Electrical power cord is located on the right side of the
warming oven. Locate the outlet within reach of the 56”
long power cord in an adjacent cabinet, within 42” of the
right side or 16” from the left side of the cutout. A recessed
receptacle can be installed on the right side of the cutout,
7” max. from the rear of cabinet.