Asus Motherboard P5MT-S - Manual (Page 136)

5-36 Chapter 5: RAID configuration
10. The screen displays the information on the created RAID set.
Press to exit the utility.
8. If you want to make the array
bootable, select Yes from the
menu, then press .
9. When prompted to create the
RAID 0 set, select , then
press .
A Build Complete message
appears to indicate that you have
successfully created the RAID 0
set.
The utility erases all data from the selected hard disk drives. Make sure
to backup all important data before creating a RAID set.