Asus Motherboard P5MT-S - Manual (Page 132)

5-32 Chapter 5: RAID configuration
5.4.1 Configuring the SCSI controller
You need to configure the SCSI controller before creating a RAID set. After
selecting the SCSI channel to use, the utility prompts you to select from
the available options. Use the arrow keys to select Configure/View SCSI
Controller Settings, then press .
5.4.2 Enabling the HostRAID controller
To enable the Adaptec HostRAID controller:
1. Use the arrow keys to select the HostRAID item in the Configuration
section.
2. Press to set the item to Enabled.
3. Press to exit.
4. When the utility prompts you to
save the changes, select Yes,
then press .