GE JAS02SNSS - Manual (Page 21)

How to Delay the Start of Cleaning
Touch the Self Clean pad.
Using the + or – pads, enter the
desired clean time.
Touch the Delay Start pad.
Using the + or – pad, enter the time
of day you want the clean cycle to
start.
Touch the Start pad.
The door locks automatically. The display
will show the start time. It will not be
possible to open the oven door until
the temperature drops below the lock
temperature and the Locked Door light
goes off.
When the Locked Door light goes off, open
the door.
After a Clean Cycle
You may notice some white ash in the oven.
Wipe it up with a damp cloth after the oven
cools.
If white spots remain, remove them with a soap-
filled steel wool pad and rinse thoroughly with a
vinegar and water mixture.
These deposits are usually a salt residue that
cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle,
repeat the cycle.
■ You cannot set the oven for cooking until the
oven is cool enough for the door to unlock.
■ Apply a small amount of vegetable oil to a
paper towel and wipe the edges of the oven
racks with the paper towel. Do not spray with
Pam ® or other lubricant sprays.
The oven door must be closed and all controls must be set correctly for the cycle to work properly.
21