AltiGen comm 600H - Manual (Page 58)

User Reference
48 Alti-IP 600H Manual
Redial Phone is onhook
1) Press REDIAL button.
2) Use / to scroll to the desired entry. ( scrolls to previous
entry, scrolls to first entry.)
3) Press SPRK/MUTE button or raise handset.
• Redial up to 16 last calls
• Redial up to 32 digits.
Release For a connected call:
1) Press RELEASE to hang up the call.
Restore
Default
Settings 1) Press * * 7, then ENTER button, * * 2, then ENTER button
Ring Tones 1) Press * * 6, then ENTER button; scroll to SELECT RING.
Soft Key*
• N/A
• BLF
• Feature
Code
• Line Park
• Call
Record
• Speed Dial
• Phone
Setting
• Directory
• Headset
1) Press SOFT KEY 1-10 to initiate one of the following
functions (N/A, Busy Lamp Field, AltiServ feature code, line
park, call record, speed dial, Phone Setting, Directory or
Headset) pre-assigned by the System Administrator.
Note: Lower left SOFT KEY is set up as FLASH by default. Only
this key can be configured for FLASH. All other SOFT KEYS
are set up as Phone Setting by default.
Speaker To use the speakerphone:
1) Press the SPKR button
Transfer* During a call:
1) Press XSFR button, which places the call on hold
2) Dial the number you wish to transfer the call to
3) Hang up if the party answers the call.
4) If the party refuses the call, return to the original call by
pressing (BACK key).