Network settings – AltiGen comm 600H User Manual
Page 34

Alti-IP 600H Manual 24
Network Settings
Current 
AltiWare
System>Current AW
Displays the current AltiWare 
server’s IP address assigned to the 
phone
Hour Offset
System>Hour Offset
Sets the time offset from the 
AltiWare server’s time.
TFTP Server
System>TFTP Server 
{Save TFTP Server IP 
Address}
Sets the TFTP server IP address for 
updating firmware.
Boot 
Download
System>Boot 
Download
After firmware image upgrade, 
submenu changes to {No}. Used 
mainly for upgrading or 
troubleshooting. On the next boot, 
the phone will download the new 
firmware from the TFTP server, if 
set to [YES].
Note: Make sure to launch
TFTP32.exe.
When downloading, the 
phone key pad is disabled.
Emergency 
Number
System>Emergency 
Num
Sets the IP phone’s emergency 
number
Emergency 
Gateway
System>Emergency 
GW
Sets the IP phone’s emergency 
gateway IP address
Version 
Information
System>Version 
Info {Read only, version 
information}
Indicates the version number of the 
IP Phone.
Setting
Menu Path {Sub Menu}
Description
Enable DHCP
Network>Enable 
DHCP
Set YES or NO to indicate whether 
Dynamic Host Configuration 
Protocol (DHCP) is being used by the 
IP phone to retrieve new IP address 
upon boot up.
