AltiGen comm 600H - Manual (Page 56)

User Reference
46 Alti-IP 600H Manual
Conference* During a call:
1) Press CONF button (this automatically selects a new line
and places the other party on hold)
2) Enter target telephone number
3) When the call connects, press CONF button again OR
(BACK key) to cancel conference and return to original party.
The # of parties allowed in a conference call depends on the
AltiServ system. In general, up to 6 parties are allowed.
To conference an incoming call when no conference is in
progress:
1. Connect to a caller.
2. Get incoming call whose Caller ID or Caller Name is
displayed on the LCD. Call waiting tone is played.
3. Press the ENTER button to answer caller and place original
caller on hold.
4. Press / (UP/DOWN keys) to select the original hold call.
5. Press the CONF button to create a conference and join both
callers.
If a conference is already in progress, to conference an
incoming call:
1. Connect to conference with two or more members.
2. Get incoming call whose Caller ID and Caller Name is
displayed on the LCD. Call waiting tone is played.
3. Press the ENTER button to answer the incoming call and all
other conference members are still in conference.
4. Press / (UP/DOWN keys) and select one of the
members in conference (displays “ConfHold”), then press
the CONF button to join the incoming caller to the
conference.
The user who initiates the conference call can select the other
conference member’s call and drop it from the conference.
To drop a conference member:
1. Connect to conference with two or more members.
2. Use / (UP/DOWN keys) to select the member to
disconnect.
3. Press the (BACK key) to disconnect this caller.
4. If conference initiator hangs up, feature becomes
unavailable to all other conference members.
• The number of parties allowed in a conference call
depends on the AltiServ system. In general, up to 6 parties
are allowed.