AltiGen comm 600H - Manual (Page 57)

Appendix A
Alti-IP 600H Manual 47
Configuration
Menu* 1) Press * * 7, then ENTER button.
2) Use the navigation buttons to select configuration menu.
• / (UP/DOWN keys) allows you to scroll through text and
select features displayed in LCD screen.
• (FORWARD key) is for menu selection.
• (BACK key) returns to previous configuration menu or
deletes the last digit input.
3) Press ENTER button to access selected menu setting
Handset/
Headset/
Speaker To switch between handset, headset and speaker, the user can
go offhook, press the Speaker button, or press the Headset
button (#10 soft key)
Hold* During a call:
1) Press HOLD button to put current call on hold and make a
new call.
To retrieve a single call on hold:
1) Press HOLD button
To retrieve multiple calls on hold:
1) Use / to select a hold call to be retrieved.
2) Press ENTER button
OR
1) Press HOLD button to retrieve last hold call.
Intercom* Incoming Intercom:
Incoming voice path is heard through the speaker, indicated by
the button’s blinking indicator light
Outgoing Intercom:
1) Press ICOM button +
Line Park During a call:
1) Press #51 or Line Park soft key (if configured)
2) Enter two-digit Line Park line.
The LED for Line Park soft key will be lit up and turns off when
the parked call is picked up, the caller hangs up, or the call is
routed to voice mail.
Mute While on a call with Speaker on:
1) Press SPKR/MUTE button.
2) To disengage mute, press SPKR/MUTE button again.
Program Soft
Key 1) Press * * 6, then ENTER button; scroll to desired
programmable key to configure; enter appropriate digits for the
speed dial number or feature code.
Reboot 1) Press * * 3, then ENTER button