HP Mini 1103 - Manual (Page 17)

5. Lift the back edge (3) of the vanity cover, and then remove it from the computer (4).
NOTE: It is normal for the vanity cover to flex slightly, and you may also hear some popping
noises when the vanity cover tabs disengage from the base.
Replacing the vanity cover
Replace the vanity cover after accessing the memory module compartment, regulatory label, and other
important components. To replace the vanity cover:
1. Insert the 4 tabs on the front edge of the vanity cover into the 4 slots in the base (1).
2. Rotate the back edge (2) of the vanity cover toward you, and then firmly press it down until it snaps
into place.
Identifying the hardware 9