HP Mini 1103 - Manual (Page 16)

Bottom components
Component Description
(1) Battery locking latch Locks the battery into the battery bay.
(2) Battery bay Holds the battery.
NOTE: The SIM slot is located under the battery.
(3) Battery release latch Releases the battery from the battery bay.
Removing the vanity cover
Removing the vanity cover allows access to the memory module compartment, regulatory label, and
other important components. To remove the vanity cover:
1. Disconnect the computer from AC power.
2. Disconnect all external devices connected to the computer.
3. Remove the battery (1).
NOTE: For more information, refer to the section “Inserting or removing the battery,” later in this
guide.
4. Slide the release button (2) inward to release the vanity cover.
8 Chapter 2 Knowing the parts