HP ProLiant BL660c Gen8 Server Blade - Manual (Page 43)

Hardware options installation 43
6. Install the mezzanine card in the mezzanine assembly, and then tighten the mezzanine card screws to
secure the card to the mezzanine assembly.
7. Align the mezzanine assembly with the guide pins on the system board, and then install the mezzanine
assembly on the system board.
8. Press down firmly on the mezzanine assembly handles, and then close the mezzanine assembly latch.
9. Install the access panel.
10. Install the server blade (" Installing a server blade " on page 24 ).
HP Trusted Platform Module option
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP Product Bulletin website ( http://www.hp.com/go/productbulletin ).
Use these instructions to install and enable a TPM on a supported server blade. This procedure includes three
sections: