HP ProLiant BL660c Gen8 Server Blade - Manual (Page 41)

Hardware options installation 41
o Routing and connecting the FBWC capacitor pack cable to the mezzanine 3 connector option
6. Install the access panel.
Mezzanine card option
Optional mezzanine cards are classified as Type A mezzanine cards and Type B mezzanine cards. The type
of the mezzanine card determines where it can be installed in the server blade.
• Install Type A mezzanine cards on Mezzanine 1 connector, Mezzanine 2 connector, or Mezzanine 3
connector.
• Install Type B mezzanine cards on either Mezzanine 2 connector or Mezzanine 3 connector.
Optional mezzanine cards enable network connectivity or provide Fibre Channel support. For mezzanine
card locations, see the system board components (on page
8 ).
For mezzanine card mapping, see the HP ProLiant BL660c Gen8 Server Blade Installation Instructions or see
"Interconnect bay numbering and device mapping (on page 23 )."
To install the component:
1. Power down the server blade (on page 12 ).
2. Remove the server blade (on page 13 ).
3. Remove the access panel (on page 14 ).