beautypg.com

Connecting power and usb cables, all other models – HP StoreEver DAT Tape Drives User Manual

Page 33

background image

3. power cable

1. USB cable (pre-fitted)

2. on/off switch, make sure it is in the OFF position (O side down)

Figure 15 Connecting power and USB cables, all other models

.

2.

Plug the USB cable into the USB connector on the server.

NOTE:

It is important to ensure that you connect your drive to a USB 2.0 port. The drive will work
on a USB 1.1 port but performance will be severely degraded. See also

Verifying USB installation for optimum performance

” on page 63.

DAT USB Tape Drives

33