HP StoreEver DAT Tape Drives - Manual (Page 27)

2. Use the cable supplied with the tape drive to connect to the server.
• If your server has a standard USB port, use a standard USB cable. You can use the supplied
standard USB cable and cable ties to tidy excess cable length.
Figure 8 Connecting to a standard USB port
.
• If your server has a 4-pin USB port, select the 4-pin cable that is appropriate for the pin layout
on the USB port.
Figure 9 Connecting to a 4-pin USB port with Intel header pin layout (blue)
.
DAT USB Tape Drives 27