beautypg.com

Remove the access panel, Install the access panel – HP ProLiant ML310 G5 Server User Manual

Page 19

background image

Operations 19

3.

Remove the bezel.

Remove the access panel

WARNING:

To reduce the risk of personal injury from hot surfaces, allow the drives and the

internal system components to cool before touching them.

CAUTION:

Do not operate the server for long periods with the access panel open or removed.

Operating the server in this manner results in improper airflow and improper cooling that can

lead to thermal damage.

1.

Power down the server (on page

17

).

2.

Unlock the bezel (on page

18

).

3.

Loosen the two thumbscrews.

4.

Slide the access panel toward the rear of the server and remove from the server.

After installing hardware options, install the access panel. Be sure that the panel is locked into place

securely before powering up the server.

Install the access panel

CAUTION:

Do not operate the server for long periods with the access panel open or removed.

Operating the server in this manner results in improper airflow and improper cooling that can

lead to thermal damage.

1.

Place the access panel on the chassis and slide it toward the front of the server.

2.

Tighten the two thumbscrews.

3.

Close the bezel ("

Unlock the bezel

" on page

18

).

IMPORTANT:

Be sure that the panel is locked into place securely before powering up the

server.